Make your own free website on Tripod.com

Throttle Position Sensor Mod

 

Take tps off throttle body

Take drill bit that is the same size as the original bolt hole

Drill a hole counter clock wise from the hole

Connect original hole and new hole

Repeat for second hole

Put sensor back on TB, in the original position, and reconnect wiring

Crank the motor and let idle

Now loosen the bolts and turn the top of the sensor towards the front of the engine bay

When the idle goes crappy back the tps up a bit and tighten the bolts down

Close the hood and enjoy your new found power.

 

 

 

turn the top of the sensor to the front of the engine

Nick Boers